| Washer Number 1: DU4 Coated washer, not commercially available. Make from either INA or FAG thrust washer part number LS3047 (1 required). | ||
| Nominal Inside Diameter | 30 mm | |
| Nominal Outside Diameter | 47 mm | |
| Nominal Thickness | 3 mm | |
| Rework Outside Diameter | 43 mm | |
| Rework Thickness | 1.47 mm | |
| Washer Number 2: Purchase either INA or FAG thrust washer part number LS3047 (4 required). | ||
| Nominal Inside Diameter | 30 mm | |
| Nominal Outside Diameter | 47 mm | |
| Nominal Thickness | 3 mm (as purchased) | |
| Rework Outside Diameter | 43 mm | |
| Rework Thickness | 1.94 mm | |
| Washer Number 3: FNC washer not commercially available. Make from either INA or FAG thrust washer part number LS3047 (1 required). | ||
| Nominal Inside Diameter | 30 mm | |
| Nominal Outside Diameter | 47 mm | |
| Thickness | 3 mm | |
| Rework Outside Diameter | 42.1 mm | |
| Rework Thickness | 1.98 mm | |
| Washer Number 4: Bronze washer not commercially available. Make from hardened bronze or use an INA or FAG thrust washer, part number LS3047, and re-work to the same dimensions as Washer Number 1 (1 required). | ||
 |
||